![20220721_173015[1]-min.jpg](https://images.squarespace-cdn.com/content/v1/653ef6594f2ec941fddb5a9d/1713405496595-C2JCL73VHG2XJQK02ZA5/20220721_173015%5B1%5D-min.jpg)
![20230126_170944[1]-min.jpg](https://images.squarespace-cdn.com/content/v1/653ef6594f2ec941fddb5a9d/1713405496569-5LC1UO8OB65SN91PFJLJ/20230126_170944%5B1%5D-min.jpg)
![20230222_094457[1]-min.jpg](https://images.squarespace-cdn.com/content/v1/653ef6594f2ec941fddb5a9d/1713399305794-C6YELRH2KJUQ31BTCYJI/20230222_094457%5B1%5D-min.jpg)
![20240418_112046[1]-min.jpg](https://images.squarespace-cdn.com/content/v1/653ef6594f2ec941fddb5a9d/1713403813919-CBYSZ2CTFZ0LCKSGCZJO/20240418_112046%5B1%5D-min.jpg)
![20220916_173221[1]-min.jpg](https://images.squarespace-cdn.com/content/v1/653ef6594f2ec941fddb5a9d/1713405495558-5VX52JJ4XK6C053ZV1GX/20220916_173221%5B1%5D-min.jpg)
![20220721_165401[1]-min.jpg](https://images.squarespace-cdn.com/content/v1/653ef6594f2ec941fddb5a9d/1713405496071-EW1QYI1NHFKPYOAB40UT/20220721_165401%5B1%5D-min.jpg)
![20220723_080201[1]-min.jpg](https://images.squarespace-cdn.com/content/v1/653ef6594f2ec941fddb5a9d/1713405496092-7C3ZDKOWKBN4W7DIGV36/20220723_080201%5B1%5D-min.jpg)
1KZ Hilux Facelift Front Mount Intercooler Kit (KZN165)
The Ultimate KZN Hilux Front Mount Kit!
The neatest most direct pipework fully custom made to specifically suit this vehicle (no universal pipework with 10+ silicone joiners) boasting a big 450x300 intercooler mounted up high for great airflow and efficiency.
What is included
These are a full kit so these will come with the following.
- 450 x 300 bar and plate intercooler - 2.5" inlet and outlet.
- 3mm alloy laser cut and folded intercooler brackets
- All bolts, hardware and nutserts
-Quality silicone joiners to connect it up
-Quality USA made worm drive hose clamps
- Throttle body adaptor (cable or electric)
- 2.5" stainless intercooler piping (fully purge and tig welded with bead rolled ends to unsure no silicones piping off under boost)
These coolers are a really I think simple kit to fit. All they require is the 2 holes drilled/cut into the rad support and a simple modification to the a/c hard line bracket.
The back side of the grille does need to be clearanced to suit because of the size of the cooler, however the whole front face stays nicely on tact.
The bonnet latch support bracket gets removed but the latch gets tied back into the intercooler so it's not flopping around
2 nut-serts need to be put into the lower rad support for the lower bracket, if you don't have a nut-sert gun there are other ways around that.
Both drivers and passenger side intercooler pipes are made in 2 pieces for ease of install and maintenance. They are connected by just a straight silicon joiner.
Stainless 2.5" cooler piping for great flow and durability.
Nice and direct pipework
These kits are for the facelift models only! The brackets and cooler won't fit the pre facelift models.
If you have a pre facelift bullbar on your facelift model this kit WILL NOT work without cutting the bullbar so please ensure you have a facelift model bullbar.
For facelift models you will need approx 115mm of room between the a/c condenser fins and back of the winch if you are running one.
ARB Bull bars do require minor trimming from the back of the mount to provide clearance for the silicone joiners
Fitment will vary from different brands of bull bars, if you are running an aftermarket winch cradle in your bull bar I can not guarantee fitment. I have confirmed fitment of these kits with factory bull bar (no winch) and a facelift ARB bull bar with a winch.
The Ultimate KZN Hilux Front Mount Kit!
The neatest most direct pipework fully custom made to specifically suit this vehicle (no universal pipework with 10+ silicone joiners) boasting a big 450x300 intercooler mounted up high for great airflow and efficiency.
What is included
These are a full kit so these will come with the following.
- 450 x 300 bar and plate intercooler - 2.5" inlet and outlet.
- 3mm alloy laser cut and folded intercooler brackets
- All bolts, hardware and nutserts
-Quality silicone joiners to connect it up
-Quality USA made worm drive hose clamps
- Throttle body adaptor (cable or electric)
- 2.5" stainless intercooler piping (fully purge and tig welded with bead rolled ends to unsure no silicones piping off under boost)
These coolers are a really I think simple kit to fit. All they require is the 2 holes drilled/cut into the rad support and a simple modification to the a/c hard line bracket.
The back side of the grille does need to be clearanced to suit because of the size of the cooler, however the whole front face stays nicely on tact.
The bonnet latch support bracket gets removed but the latch gets tied back into the intercooler so it's not flopping around
2 nut-serts need to be put into the lower rad support for the lower bracket, if you don't have a nut-sert gun there are other ways around that.
Both drivers and passenger side intercooler pipes are made in 2 pieces for ease of install and maintenance. They are connected by just a straight silicon joiner.
Stainless 2.5" cooler piping for great flow and durability.
Nice and direct pipework
These kits are for the facelift models only! The brackets and cooler won't fit the pre facelift models.
If you have a pre facelift bullbar on your facelift model this kit WILL NOT work without cutting the bullbar so please ensure you have a facelift model bullbar.
For facelift models you will need approx 115mm of room between the a/c condenser fins and back of the winch if you are running one.
ARB Bull bars do require minor trimming from the back of the mount to provide clearance for the silicone joiners
Fitment will vary from different brands of bull bars, if you are running an aftermarket winch cradle in your bull bar I can not guarantee fitment. I have confirmed fitment of these kits with factory bull bar (no winch) and a facelift ARB bull bar with a winch.
The Ultimate KZN Hilux Front Mount Kit!
The neatest most direct pipework fully custom made to specifically suit this vehicle (no universal pipework with 10+ silicone joiners) boasting a big 450x300 intercooler mounted up high for great airflow and efficiency.
What is included
These are a full kit so these will come with the following.
- 450 x 300 bar and plate intercooler - 2.5" inlet and outlet.
- 3mm alloy laser cut and folded intercooler brackets
- All bolts, hardware and nutserts
-Quality silicone joiners to connect it up
-Quality USA made worm drive hose clamps
- Throttle body adaptor (cable or electric)
- 2.5" stainless intercooler piping (fully purge and tig welded with bead rolled ends to unsure no silicones piping off under boost)
These coolers are a really I think simple kit to fit. All they require is the 2 holes drilled/cut into the rad support and a simple modification to the a/c hard line bracket.
The back side of the grille does need to be clearanced to suit because of the size of the cooler, however the whole front face stays nicely on tact.
The bonnet latch support bracket gets removed but the latch gets tied back into the intercooler so it's not flopping around
2 nut-serts need to be put into the lower rad support for the lower bracket, if you don't have a nut-sert gun there are other ways around that.
Both drivers and passenger side intercooler pipes are made in 2 pieces for ease of install and maintenance. They are connected by just a straight silicon joiner.
Stainless 2.5" cooler piping for great flow and durability.
Nice and direct pipework
These kits are for the facelift models only! The brackets and cooler won't fit the pre facelift models.
If you have a pre facelift bullbar on your facelift model this kit WILL NOT work without cutting the bullbar so please ensure you have a facelift model bullbar.
For facelift models you will need approx 115mm of room between the a/c condenser fins and back of the winch if you are running one.
ARB Bull bars do require minor trimming from the back of the mount to provide clearance for the silicone joiners
Fitment will vary from different brands of bull bars, if you are running an aftermarket winch cradle in your bull bar I can not guarantee fitment. I have confirmed fitment of these kits with factory bull bar (no winch) and a facelift ARB bull bar with a winch.