N80 Spring swap hangers
Laser cut and CNC folded for precision.
75mm internal width with a 14mm pin to accommodate the factory N80 front bush to save having to hunt down extra parts/ bushes to suit
Angles front face with an infill plate to help limit getting hung up on things in tough 4wding situations
Side tab that locates up the side of the chassis to help line things up
14mm greaseable pins included!
If your looking for a bit of extra flex out of the rear of your 90s/2000s Hilux than you no doubt would have come across the N80 spring swap. Swapping your old rear springs out for a much longer and flatter spring from the later model N80 Hilux these paired with a set of 200mm or any extended shackles allow for far better flex in the rear end when accompanied by shocks to suit.
NOTE: welding spring hangers to the chassis is required
N80 Spring swap hangers
Laser cut and CNC folded for precision.
75mm internal width with a 14mm pin to accommodate the factory N80 front bush to save having to hunt down extra parts/ bushes to suit
Angles front face with an infill plate to help limit getting hung up on things in tough 4wding situations
Side tab that locates up the side of the chassis to help line things up
14mm greaseable pins included!
If your looking for a bit of extra flex out of the rear of your 90s/2000s Hilux than you no doubt would have come across the N80 spring swap. Swapping your old rear springs out for a much longer and flatter spring from the later model N80 Hilux these paired with a set of 200mm or any extended shackles allow for far better flex in the rear end when accompanied by shocks to suit.
NOTE: welding spring hangers to the chassis is required
